september 2010 ? 2002 fairchild semiconductor corporation www.fairchildsemi.com fsav330 ? rev. 1.0.4 fav330 ? 4-channel, 2:1 video switch fsav330 ? 4-channel, 2:1 video switch features ? replacement for the p15v330 ? wide bandwidth: 300mhz ? 4 switch connection between two ports ? minimal propagation delay through the switch ? low l cc ? zero bounce in flow-through mode ? control inputs compatible with ttl level applications ? set-top boxes ? flat panel displays ? crt displays ? dvd - rw description the fsav330 video switch is a quad, single-pole / double-throw, high-speed cmos ttl-compatible video switch. the low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. when /oe is low, the select pin connects the a port to the selected b port output. when /oe is high, the switch is open and a high-impedance state exists between the two ports. ordering information part number operating temperature range package packing method fsav330mx -40 to +85c 16-lead, small outline integrated circuit (soic), jedec ms-012, 0.150 inch narrow tape and reel fsav330mtcx -40 to +85c 16-, thin shrink small outline package (tssop), jedec mo-153, 4.4mm wide tape and reel fsav330qscx -40 to +85c 16-lead, quarter size outline package (qsop), jedec mo-137, 0.150 inch wide tape and reel the fairchild switch family derives from and embodies fairchild?s proven switch technology used for several years in its 74lvx3l384 (fst3384) bus switch product .
? 2002 fairchild semiconductor corporation www.fairchildsemi.com fsav330 ? rev. 1.0.4 2 fsav330 ? 4-channel, 2:1 video switch pin configurations s 1b 1 1b 2 1a 2b 1 2b 2 2a gnd v cc /oe 4b 1 4b 2 4a 3b 1 3b 2 3a 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 figure 1. logic diagram figure 2. pin assignments pin descriptions pin # name description 15 /oe bus switch enabled 1 s select input 4,7,9,12 a bus a 2,3,5,6,10,11,13,14 b 1 -b 2 bus b 8 gnd ground 16 v cc supply voltage truth table s /oe function don?t care high disconnected low low a=b 1 high low a=b 2
? 2002 fairchild semiconductor corporation www.fairchildsemi.com fsav330 ? rev. 1.0.4 3 fsav330 ? 4-channel, 2:1 video switch absolute maximum ratings stresses exceeding the absolute maximum ratings may dam age the device. the device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. in addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. symbol parameter min. max. unit v cc supply voltage -0.5 +7.0 v v s dc switch voltage -0.5 +7.0 v v in dc input voltage (1) -0.5 +7.0 v i ik dc input diode current -50 ma i out dc output sink current 128 ma i cc /i gnd dc v cc / gnd current 100 ma t stg storage temperature range -65 +150 c esd human body model, jesd22-a114 4000 v note : 1. the input and output negative voltage ratings may be ex ceeded if the input and output diode current ratings are observed. recommended operating conditions the recommended operating conditions table defines the conditions for actual device operation. recommended operating conditions are specified to ens ure optimal performance to the datasheet specifications. fairchild does not recommend exceeding them or designing to absolute maximum ratings. symbol parameter min. max. unit v cc power supply 4.0 5.5 v v in input voltage 0 5.5 v v out output voltage 0 5.5 v t r , t f input rise and fall time switch control input 0 5 ns/v switch i/o 0 dc t a operating temperature, free air -40 +85 c note : 2. unused control inputs must be held high or low; they may not float.
? 2002 fairchild semiconductor corporation www.fairchildsemi.com fsav330 ? rev. 1.0.4 4 fsav330 ? 4-channel, 2:1 video switch dc electrical characteristics typical values are at v cc =5.0v and t a = +25c. minimum and maximum values are at t a = -40 to +85c. symbol parameter conditions v cc (v) min. typ. max. units v analog analog signal range 5.0 0 2 v v ik clamp diode voltage i in =-18ma 4.5 -1.2 v v ih high-level input voltage 4.0 to 5.5 2.0 v v il low-level input voltage 4.0 to 5.5 0.8 v i i input leakage current 0 v in 5.5v 5.5 1.0 a i oz off-state leakage current 0 a, b v cc 5.5 1.0 a r on switch on resistance (3) v in =1.0v, r i =75 , i on =13ma 4.5 3 7 v in =2.0v, r i =75 , i on =26ma 4.5 7 10 i cc quiescent supply current v in =v cc or gnd, i out =0 5.5 3 a i cc increase in i cc per input one input at 3.4v other inputs at v cc or gnd 5.5 2.5 ma note : 3. measured by the voltage drop between the a and b pins at the indicated current through the switch. on resistance is determined by the lower of the voltages on the a or b pins. ac electrical characteristics t a =-40 to +85c, c l =50pf, r u =r d =500 . symbol parameter conditions v cc =4.5 ? 5.5v v cc =4.0v units figure min. typ. max. min. max. t pzh , t pzl output enable time, select to bus b v i =7v for t pzl v i =open for t pzh 5.2 5.7 ns figure 3 figure 4 output enable time, /oe to bus a, b 5.1 5.6 t phz , t plz output disable time, select to bus b v i =7v for t plz v i =open for t phz 5.2 5.5 ns figure 3 figure 4 output disable time, output enable time /oe to bus a, b 5.5 5.5 b w -3db bandwidth (4) r l =150 , t a =25c 300 mhz x talk crosstalk r in =10 , r l =150 , f=10mhz -58 db d g differential gain r l =150 , f=3.58mhz 0.64 % d p differential phase r l =150 , f=3.58mhz 0.1 o irr off isolation r l =150 , f=10mhz -60 db note: 4. this parameter is guaranteed by device characterization, not production tested. capacitance t a =+25c, f=1mhz. capacitance is char acterized, not production tested. symbol parameter conditions typ. units c in control pin input capacitance v cc =5.0v 3 pf c i/o a port input / output capacitance v cc , /oe=5.0v 7 pf b port 5 c on switch on capacitance v cc =5.0v, /oe=0v 12 pf
? 2002 fairchild semiconductor corporation www.fairchildsemi.com fsav330 ? rev. 1.0.4 5 fsav330 ? 4-channel, 2:1 video switch ac loadings and waveforms notes: 5. input drive by 50 source terminated in 50 . 6. c l includes load and stray capacitance. 7. input prr=1.0mhz, t w =500ns. figure 3. ac test circuit figure 4. ac waveforms
? 2002 fairchild semiconductor corporation www.fairchildsemi.com fsav330 ? rev. 1.0.4 6 fsav330 ? 4-channel, 2:1 video switch physical dimensions x 45 detail a scale: 2:1 8 0 notes: unless otherwise specified a) this package conforms to jedec ms-012, variation ac, issue c. b) all dimensions are in millimeters. c) dimensions are exclusive of burrs, mold flash and tie bar protrusions d) conforms to asme y14.5m-1994 e) landpattern standard: soic127p600x175-16am f) drawing file name: m16arev12. seating plane gage plane c c 0.10 see detail a land pattern recommendation pin one indicator 1 16 8 m 0.25 9 cba b a 5.6 1.27 0.65 1.75 10.00 9.80 8.89 6.00 1.27 (0.30) 0.51 0.35 1.75 max 1.50 1.25 0.25 0.10 0.25 0.19 (1.04) 0.90 0.50 0.36 (r0.10) (r0.10) 0.50 0.25 4.00 3.80 figure 5. 16-lead, small outline integrated ci rcuit (soic), jedec ms-012, 0.150-inch narrow package drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand the terms of fairchild?s worldwide terms and condition s, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductor?s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/
? 2002 fairchild semiconductor corporation www.fairchildsemi.com fsav330 ? rev. 1.0.4 7 fsav330 ? 4-channel, 2:1 video switch physical dimensions side view top view detail a end view land pattern recommendation figure 6. 16-lead, quarter size outline p ackage (qsop), jedec mo-137, 0.150-inch wide package drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand the terms of fairchild?s worldwide terms and condition s, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductor?s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/
? 2002 fairchild semiconductor corporation www.fairchildsemi.com fsav330 ? rev. 1.0.4 8 fsav330 ? 4-channel, 2:1 video switch physical dimensions 0.65 4.40.1 mtc16rev4 0.11 4.55 5.00 5.000.10 12 7.35 4.45 1.45 5.90 figure 7. 16-lead, thin shrink small outline package (tssop), jedec mo-153, 4.4mm wide package drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand the terms of fairchild?s worldwide terms and condition s, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductor?s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/
? 2002 fairchild semiconductor corporation www.fairchildsemi.com fsav330 ? rev. 1.0.4 9 fsav330 ? 4-channel, 2:1 video switch
|
